Back to the list

TRIMS

  • 1
  • 2
  • 3
  • 4
  • 5

Trim 9

Remove the wheel trim using hubcap tool 5 (located in the tool kit) by fitting the hook into one of the openings around the edge of the wheel trim.

To refit it, align it with valve 10.

Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

Trim 11

Remove using hubcap tool 5 (located in the tool kit) by engaging the hook in the opening near the edge of the trim.

To refit, position the five trim attachments facing the five wheel attachments and press hard in the middle of the trim to clip it to the wheel.