DRIVING AIDS
| “Driving assistance” menu |
From the home screen, press “Menu”, “Vehicle” then “Driving assistance” to access the following items: - “Lane departure warning”; - “Lane keeping assist”; - “Lane departure warning settings”; - “Lane keeping assist settings”; - “Distance warning”; - “Active braking”; - “Blind spot alert”; - “Speed alert settings”; - “Advanced traction control”; - “Automatic high beam”. | |
“Lane departure warning”
This system notifies the driver when they inadvertently cross a continuous or broken line. Please refer to the driver’s handbook for further information.
To activate it, select or “On”.
“Lane keeping assist”
This system notifies the driver when they accidentally cross a continuous or broken line and triggers corrective action on the steering system and the trajectory of your vehicle. Please refer to the driver’s handbook for further information.
To activate it, select .
For safety reasons, carry out these operations when the vehicle is stationary.
“Lane departure warning settings”
Press this menu to adjust the audio volume and the lane departure warning sensitivity.
- “Volume”: press “+” or “-” to adjust the volume level (five levels).
- “Sensitivity”: select “Low”, “Middle” or “High” to adjust the warning sensitivity.
Note: if “Lane departure warning” is switched “OFF”, the “Lane departure warning settings” function is greyed out and cannot be accessed.
“Lane keeping assist settings”
Select this menu to adjust the strength of the steering wheel vibration and the sensitivity of the lane departure warning.
- “Vibration”: select “Low”, “Middle” or “High” to adjust the strength of the vibration.
- “Sensitivity”: select “Low”, “Middle” or “High” to adjust the warning sensitivity.
Note: if the “Lane keeping assist” function is deactivated, the “Lane keeping assist settings” menu is greyed-out and cannot be accessed.
“Distance warning”
This system notifies the driver when they are too close to other vehicles. Select “On” to activate the system. Please refer to the vehicle user manual for further information.
“Active braking”
This system notifies the driver If there is a danger of collision. Select “On” to activate the system. Please refer to the driver’s handbook for further information.
“Blind spot alert”
This system notifies the driver when another vehicle is in their blind spot. Select “On” to activate the system. Please refer to the driver’s handbook for further information.
For safety reasons, carry out these operations when the vehicle is stationary.
“Speed alert settings”
“Speed alert”
The system detects any speed violations and notifies the driver via the instrument panel. Select “On” to activate the system. Please refer to the driver’s handbook for further information.
“Overspeed sound alert”
The system warns the driver by sound signal if the speed limit is exceeded. Select “On” to activate the system.
Note: you cannot activate the overspeed alert and overspeed sound alert if the speed limit alert is deactivated.
“Risk area”
This system notifies the driver via the instrument panel on entering a speed check area or a high risk area. Select “On” to activate the system.
Note: if “Speed warning” is deactivated, the “Risk area” function is automatically deactivated.
“Advanced traction control”
This system helps you limit the wheelspin of the drive wheels and control the vehicle when accelerating or decelerating. You can select the following modes:
- “Auto”;
- “Expert”.
Please refer to the driver’s handbook for further information.
“Automatic high beam”
This system switches the main beam headlights on and off automatically. Please refer to the vehicle user manual for further information.
Reset
To reset your selection, press 1 then “Reset”.