Back to the list
Opaque panoramic roof
Opaque panoramic roof
The panoramic roof made of opaque glass is divided into two sections (front and rear).
It can become totally opaque or completely transparent. You can also make only one
area opaque (front or rear).
Each transition or transition request is accompanied by an animation representing
the roof.
Operation
To make the entire roof opaque or transparent, press and hold switch 1.
To change one of the sections (front or rear) to opaque or transparent mode, press briefly on switch 1 as many as times as required.
Note: before pressing switch 1 again, you must wait for the previously selected action to be completed.
Depending on the vehicle, it is also possible to operate the vehicle by voice command.
Please refer to the multimedia instructions for more information.
Tip
The roof becomes completely opaque several minutes after the engine has stopped, or
when the doors are locked.
Tip
When the driver's door is opened, the roof resumes the status that was selected the
last time the engine was stopped or the doors were locked.
Limits of operation
In very cold weather conditions, the panoramic roof may have limited operation (reduced
movement) or may not work at all.