WIRELESS CHARGER

Induction charging area

Introduction

Use the induction charging zone 1 to charge a telephone without a cable.

If the vehicle is equipped, the charging area is indicated by (depending on the vehicle):

- an associated symbol;

and/or

- the charging status is automatically displayed on the screen as long as the phone is positioned in the dedicated area.

Its location may vary depending on the vehicle. Please refer to the vehicle user manual for further information.

Note:

- induction charging is initiated when the ignition is switched on or when the engine is started;

- for more information on compatible telephones, contact an authorised dealer or visit https://renault-connect.renault.com.

- it is preferable to remove the protective bodyshell or case from your phone before charging to obtain optimal charging;

- for optimal charging, the entire surface of the smartphone should coincide with a maximum of the surface of the charging area and be positioned the most central possible.

Charging procedure

Position your telephone 2 in the induction charging area 1. Charging is automatically started and the charging progress 3 is displayed on the screen.

The charging procedure may be interrupted if an object is detected in the induction charging area 1 or if the induction charging area 1 is overheating. Once the temperature has dropped, your phone will soon start to charge again.

Charging progress

The multimedia system informs you of the charging status 3 for your telephone 2:

- charging complete 4;

- charging in progress 5;

- object detected in the charging area/object overheating/charging procedure interrupted 6.

Note: the multimedia system will signal if your telephone 2 charging procedure is interrupted.