Back to the list

My Safety

  • 1
  • 2
  • 3
  • 4
  • 5

My Safety

Introduction

The " My Safety " function can be used to deactivate or activate a set of driving assistance functions simultaneously.
Depending on the vehicle, you can configure the " My Safety " function from the multimedia screen by selecting the driving assistance functions to be switched off simultaneously.

Operation

"ALL ON" mode

Depending on the vehicle, this mode includes the following driving assistance functions:
When "ALL ON" mode is activated: the indicator light on button 1 lights up and the "My Safety All ON selected" message appears on the instrument panel to confirm this. The driving aids that are available in the mode are activated.

"Perso" mode

This mode can be used to deactivate or reactivate some driving functions that are available in "ALL ON" mode if previously configured via the "My Safety Perso" setting.
With the ignition on, press button 1 twice in succession to activate "Perso" mode. The first time you press it, the "Press again for My Safety Perso" message appears on the instrument panel. On the second press, the indicator light on the button 1 goes out. "Perso" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.
To switch back to "ALL ON" mode, press button 1 once. The indicator light on button 1 lights up.
Tip
Depending on the vehicle and on the length of time since the last time the engine was stopped, the "ALL ON" mode is reactivated:
  • when the vehicle is unlocked;
or
  • when a door is opened;
or
  • when the engine is restarted.

Configuration of "My Safety Perso"

WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
Tip
The "My Safety Perso" settings saved for "Perso" mode are stored each time the engine is or when the doors are locked.

Configuration from the multimedia screen 2

Refer to the multimedia instructions for information on accessing the settings.

my safety