TRIP COMPUTER: trip settings

  • 1
  • 2
  • 3
  • 4
  • 5

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

101778 km

a) Total mileage and trip mileage recorder.

112.4 km

FUEL USED

b) Journey parameters.

Fuel used.

Fuel consumed since the last reset.

8L

AVERAGE

c) Average fuel consumption since the last reset.

The value is displayed after having travelled at least 400 metres since the last reset.

5.8 L/100

CURRENT

d) Current fuel consumption.

This value is displayed after a speed of approximately 20 mph (30 km/h) is reached.

7.4 L/100

Examples of selections

Interpreting the display selected

RANGE

e) Estimated range with remaining fuel.

The value is displayed after driving 400 metres.

541 km

DISTANCE

f) Distance travelled since last reset.

522 km

AVERAGE

g) Average speed since the last reset.

The value is displayed after driving 400 metres.

123.4 km/H

Examples of selections

Interpreting the display selected

On-board computer with mileage-before-service message

h) Mileage before service or oil change.

Mileage before service

With the ignition switched on, and the engine not running and the selected display is “Mileage before service”, press one of buttons 2 or 3 for about 5 seconds to display the mileage before service (distance or time to the next service). When the distance value approaches its limit, there are several possible scenarios:

- distance/time remaining less than 900 miles (1,500 km) or one month: the message “Service due in” is displayed accompanied by the nearest term (distance or time);

- distance equal to 0 miles or service date reached: the message “service vehicle” is displayed accompanied by the © warning light.

The vehicle requires a service as soon as possible.

SERVICE INTERVALS

SERVICE IN

30 000 Kms / 12 MO

SERVICE DUE IN

300 Kms / 24 DAYS

SERVICE REQUIRED

Reset: to reset the distance before service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

On-board computer with distance before next service message (cntd.)

h) Mileage before service or oil change.

Mileage before service

With the ignition switched on and the engine not running, and the selected display is “Mileage before service”, press one of buttons 2 or 3 for about 5 seconds to display the mileage before a service, then briefly press one of buttons  2 or  3 to view the range (distance or time remaining before the next service). When the distance value approaches its limit, there are several possible scenarios:

- distance/time remaining less than 900 miles (1,500 km) or one month: the message “Service due in” is displayed accompanied by the nearest term (distance or time);

- range equal to 0 km/miles or service date reached: the message “service vehicle” is displayed accompanied by the © warning light.

The vehicle requires an oil change as soon as possible.

SERVICE INTERVALS

OIL CHANGE IN

30 000 Kms / 24 MO

SERVICE DUE IN

300 Kms / 24 DAYS

SERVICE REQUIRED

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Reset: to reset the distance before service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

TYRE PRESSURE : SET TPW

i) Reset the tyre pressure.

Please refer to the information on the “Tyre pressure loss warning” in Section 2.

j) Cruise control and speed limiter programmed speed.

Refer to the information in “Cruise control” and “Speed limiter” in Section 2.

SPEED LIMITER

90 km/H

CRUISE CONTROL

90 km/H

13°

16:30

k) Clock and temperature.

Please refer to the information under “Clock and exterior temperature”.

NO MESSAGE MEMORISED

l) Trip log.

Successive display:

- information messages (passenger airbag OFF etc.);

- operating fault messages (check the injection system, etc.).

CLIO : Trip computer and warning system