DRIVING POSITION: settings
Manually controlled seats
moving the seat forwards or backwards
Lift handle 1. At the desired position, let go of the handle again. Ensure it is correctly locked in place.
raising or lowering the seat
Move the lever 4 as many times as required.
tilting the seatback
Lift handle 3 and tilt the seatback to the desired position.
ELECTRIC lumbar support adjustment
Move the switch 5 forwards, backwards, up or down.
MANUAL lumbar support adjustment
Raise or lower the handle 2 on the right-hand side of the seat.
Massage
Use switch 6 to access the “Massage” menu from the multimedia screen 8. Please refer to the instructions for the multimedia system.
Front seat heating
With the ignition on, successive presses on the switch 7 of the required seat activate a high or moderate level of heating or switch the function off.
Seat belt
Adjusting the height
Press the button 9 and simultaneously adjust the seat belt to the required height.
Carry out these adjustments when the vehicle is stationary.
Headrest
Raising the headrest
Pull the headrest upwards to the desired height.
Lowering the headrest
Press button 11 and guide the headrest down to the desired height.
ADJUSTING THE ANGLE OF THE HEADREST
If fitted to the vehicle, move the section towards or away from you 10 to the required position.
Folding door mirrors
With the switch 14 in the central position: the door mirrors fold in automatically when the vehicle is locked. They will fold out when the ignition is next switched on.
Depending on the vehicle, to force the door mirrors to fold back or out, position switch 14 at A or B. Automatic mode is then deactivated.
To reactivate it, set switch 14 to the central position.
Door mirrors
Adjustment
Select the door mirror using switch 13, then use button 12 to adjust it to the desired position.